Camp Snap 2 review: viral screen-free compact returns with welcome upgrades and same low price | Daily Reports Online
Why you can trust TechRadar
We spend hours testing every product or service we review, so you can be sure you’re buying the best. Find out more about how we test.
Camp Snap 2: two-minute review
From a simple idea, Camp Snap is building an empire. The concept of an ultra-cheap point-and-shoot digital camera with no screen — meaning you can’t see the photos you take until you download them after the fact — proved to be a massive hit, and the original Camp Snap camera has since been joined by the video-focused Camp Snap CS-8, and the upgraded CS-Pro, which doubles the resolution from 8MP to 16MP. And now, we have the Camp Snap 2.
The makers are clearly keen not to mess with success, because the Camp Snap 2 keeps the feel and concept of the original camera very much intact. This new model keeps an 8MP sensor, and it once again has no screen, just a small panel with a running shot counter, a fixed-focus lens, and an LED flash. So, you might ask, what actually is new?
A few things, but the most significant is the new ‘Filters’ button, which allows you to select from a series of vintage-style looks for your images. This was an idea already explored on the CS-Pro, but the Camp Snap 2 ups the ante with six filters rather than the Pro’s somewhat paltry four. While you have to invest some time into learning which filter is which and what they look like (since you can’t check your images mid-shoot), this makes the Camp Snap 2 a more varied and versatile camera to use than the original, adding greater scope for creativity.
This is an important addition, given that there’s little room for creativity elsewhere — the lens is fixed-focus and there’s no settings control. Furthermore, the Camp Snap 2 adds a tripod mount, a 33.5mm filter thread on the lens and lugs to attach a strap (though one isn’t supplied). These additions combine to make the Snap 2 feel a bit more like a proper camera than the original ever did. Its image quality is still no great shakes, but the Camp Snap 2 offers more scope and variety without sacrificing its identity as a camera that basically anyone can use — like the original, it’s very kid-friendly.
I’ve taken the Camp Snap 2 everywhere with me for a couple of weeks, and I can say that I thoroughly enjoyed it. The newly slimmed-down body makes it easy to slip into a pocket and pull out for quick grab shots here and there, and with no screen, you can’t spend time fussing over them after the fact.
Normally, when a successor camera is this iterative and minor an upgrade, we reviewers tend to say things like ‘If you already own the original, save your money.’ But this is a bit of a different situation. Because the Camp Snap 2 is so cheap, I’d say that if you already own, like and use the original Camp Snap — hell yeah, you might as well upgrade. The filter button adds depth and variety, and one of the most irritating features of the previous model — the shutter lag — has mostly been dealt with.
I’d also go so far as to say that for many users, this is probably a better buy than the more expensive CS-Pro. You get a more pocketable camera for a lower price, and for the types of people who are shooting with Camp Snaps, I don’t think an extra 8MP of resolution is all that useful, particularly when the sensor is not especially larger. The main reason you might prefer the Pro is that its filters are more dramatic and distinctive, though there are fewer of them.
So, if you like the original Camp Snap, and like the sound of the Camp Snap 2 — yes, I feel comfortable recommending you buy it too. At this price, why not?
Camp Snap 2: price and availability
Camp Snap hasn’t got carried away with its success, and the Camp Snap 2 is still very attractively priced indeed, launching at $69.95 / £53 (around AU$130). This is at about the same level as the original Camp Snap, and comes in way less the CS-Pro, which goes for $99 / £90 (around AU$180).
Snap 2 is currently available from the Camp Snap website, and I expect before long it’ll also make its way to major retailers, the way the original Camp Snap has.
Frankly, this pricing is perfect. For a fun, knockabout digital camera that doesn’t offer much in the way of image quality and is all about the ultra-simple point-and-shoot vibes, nobody should be paying more than this. It’s a camera that pretty much anyone can instantly pick up and use, at a price that lots of people can afford.
Camp Snap 2: design
- Even slimmer and lighter than the original, just 3.8z / 108g
- All-plastic build with LED flash and fixed-focus lens
- Point-and-shoot operation, but adds button to switch filters
The original Camp Snap was already slim, but the Camp Snap 2 is even slimmer — around 15% slimmer according to the manufacturers. It is genuinely pocketable in a way that not all cameras that make ‘pocketable’ claims actually are, and at 3.8oz / 108g it’s a true featherweight. The body is all-plastic, of course, but the front has a nice textured surface for a bit of extra grip, and there’s an indentation on the rear panel for your right thumb to rest. On the sides there are lugs for attaching a strap, though no strap is supplied with the camera.
On the top you have just a single button: the shutter. This is of course a point-and-shoot, so you won’t be fiddling with settings dials. On the front you have the LED flash and the fixed wide-angle lens — and, a new addition, a 30.5mm filter thread on the lens. Though this was on the CS-Pro, it wasn’t on the original Camp Snap, and it allows you to attach screw-on filters to imbue your images with specific effects — as one reader suggested, a good fit for the Camp Snap would be a mist filter to enhance the lo-fi, retro feel of images. Camp Snap has also not-so-subtly hinted that Camp Snap-branded filters will be coming in the future.
At the rear you have the simple screen, which displays a shot-counter and lets you know which filter you currently have selected. As well as the aforementioned thumb groove, you also have the power switch, which doubles as a flash toggle, and the tinny speaker that plays the stock ‘shutter release’ sound effect. The viewfinder is a perfectly serviceable optical type — if you’ve ever used an old-school disposable, it’ll be familiar. It’s nothing special but it does the job.
To the right of the screen, there’s the new filter select button. Pressing this button allows you to cycle through the filter selection. It can also be held down for ten seconds to activate ‘Camp Lock’ — which locks the button to make the camera more useable for children (negating a scenario in which they accidentally take all their pictures in black and white). Hold down for ten more seconds to unlock. Also, while testing this, I inadvertently discovered that tapping the filter button twice in quick succession will cause the camera to take two photos. Not sure why, but there you go.
At first it seems like the Camp Snap 2 doesn’t have a battery indicator like the four LEDs on the CS-Pro. In fact, it does, but you could be forgiven for not noticing it. When you boot up the camera, the screen will briefly display a number between 0 and 100, before reverting to your current shot counter. This is, I believe, a percentage-based battery indicator. It’s not exactly advertised, and easy to miss given that your shot counter will likely be a quite similar number, but it is there.
Color-wise, the Camp Snap 2 is available in a selection of standard shades — green, black, white, yellow and brown. However, it can also be bought in a selection of rather stylish translucent ‘jelly’ colorways, evoking the early-millennium trend for translucent tech. I’ll admit that I think these versions are pretty cool, and my partner (who isn’t into cameras) independently showed me them on Instagram because she liked the look of them. I suspect they’ll be very popular.
Camp Snap 2: performance
- Image quality is a bit scuzzy, but it’s part of the lo-fi charm
- Operation is very easy, and the shutter lag from the original has been dealt with
- New filters add creative options, but aren’t as striking or distinctive as those on the CS-Pro
As mentioned, the Camp Snap 2 uses the same sensor as the original, so raw image quality is identical. You still get 8MP images with limited dynamic range. Blown-out highlights are a fairly common sight, as are muddy and indistinct shadows. In the latter situation, the LED flash can be helpful, though it’s nowhere near as powerful as a proper Xenon flash (which the CS-Pro has).
The new filter dial really does add some welcome creative depth. You have six options — first there’s the Standard (S) look, which produces naturalistic but warm colors. Then you have Vintage 1 to 3 (V1, V2, V3). V1 ups the saturation and has a slight purple tint; V2 is almost identical to Standard, but slightly cooler; V3 has a distinctly sunny yellow cast.
Next, there’s the black & white mode (BW), which delivers decent contrast for striking monochrome. And lastly there’s the interestingly named Analog (A). I was expecting this to be covered in artificial film grain, something that Camp Snap experimented with on the CS8. But in fact, it’s the warmest look of the bunch, with muted colors and a slight magenta cast, and it proved to be my favorite.
Image 1 of 6
I was surprised by how subtle the filters were, especially coming off the back of the CS-Pro, in which they are very striking. Someone looking for a dramatic image effect might come away a little disappointed; V2 in particular is so similar to Standard that I questioned the point of having it. I think in practicality, most users will probably just figure out which is their favorite and stick with it, occasionally switching to BW when the moment calls. I can’t exactly picture myself agonizing over whether this pub garden sunset deserves V2 or V3.
Image 1 of 16
One oft-criticized aspect of the original Camp Snap was its shutter lag — the appreciable delay between the user pressing the shutter button and the photo actually being taken. This was significantly improved in the CS-Pro, with a more powerful processor, and in the Camp Snap 2 it seems to have been somewhat improved.
However, I would note that the lag seems to be mostly confined to the cosmetics — the shot counter and the shutter release sound effect. On a few occasions, I pressed the shutter and then heard the MIDI ‘clunk’ half a second after moving the camera away, and chastised myself for missing a shot through impatience. But later, when I reviewed the image, I seemed to have gotten away with it. And I can live with the sound effect being slow if I still have the shot in the bag.
It’s also worth noting that the Camp Snap 2 has a new feature called QuickDraw. After a period of inactivity, the camera sleeps to save power, but you can press the shutter button while it’s in this state, and it will wake and quickly take a picture. Note that I said ‘quickly’, not ‘instantly’ — it does take a moment to bestir itself. I’ve seen a few comments online complaining about shutter lag, and I actually think this is probably what they’re referring to. When the camera was awake, I experienced no real shutter lag issues.
Should I buy the Camp Snap 2?
Buy it if…
Don’t buy it if…
How I tested the Camp Snap 2
- I received a loan unit of the Camp Snap 2 for testing
- I have taken it out on a number of photo excursions, as well as to a sporting event and to a concert
- I’ve shot in variable light conditions throughout June, though with mostly very bright and sunny weather
I received a review sample of the Camp Snap 2 from the manufacturers, and had it in my pocket and about my person for a couple of weeks. I took it on excursions around London, as well as on trips south to Bradford-on-Avon, Frome and Bath, during which time I used it to capture more than 100 photos using all of the filters, in a range of weather and lighting conditions.
First reviewed June 2026
