Snakebyte Ergo Grip S2 review: a functional Joy-Con 2 grip with a few snags | Daily Reports Online
Why you can trust TechRadar
We spend hours testing every product or service we review, so you can be sure you’re buying the best. Find out more about how we test.
Snakebyte Ergo Grip S2 review
The Snakebyte Ergo Grip 2 is a basic grip for the Switch 2’s Joy-Cons, although it has a few tricks up its sleeve.
Its design is very much a case of function over form. There’s no RGB lighting, and the all-black colorway leaves no room for levity. At least it’s simple and unfussy, consisting merely of a central bar and two grip handles on either side. These handles are reasonably long but quite thin compared to more traditional controllers.
The build quality isn’t particularly great, it has to be said. There’s quite a bit of flex to the whole unit, although it’s solid enough and the plastic feels smooth in the hand. But it’s certainly not going to challenge the best Nintendo Switch 2 controllers on this front.
There’s a small switch underneath the Ergo Grip 2 to release the central bar from the bottom of the pad, allowing it to pivot upwards and out of the way of the grip handles so you can insert the Joy-Cons. This seems a little gimmicky, and what’s more, it’s not strictly necessary: by inserting my Joy-Cons at an angle, I managed to get around the handles while the center was locked down.
I think it would’ve been simpler to engineer a solution where the handles didn’t get in the way at all, rather than have a rotating mechanism. I’m also mildly concerned about the button that locks it down. I noticed a small amount of play while it’s locked down, which could spell failure further down the line.
Happily, the fit for the Joy-Cons is more secure. They slot into the Ergo Grip 2 just as well as they do into the Switch 2 itself. The hold feels strong, and the handles effectively partially cover their outsides, which prevents them from being prised out easily.
In action, it’s quite comfortable. The Joy-Cons sit fairly close together, but not so close as to cause issues. However, the grip handles took me a little while to get used to. At first, I had to slide my hands upwards to reach the Joy-Cons’ bumpers when playing games such as Super Mario Bros. Wonder. However, I discovered that I could slot my last two fingers into the handles’ small indents for better purchase, which helped alleviate this problem somewhat.
But there are a few more ergonomic issues with the Ergo Grip 2. The bottom parts of the grips aren’t particularly long, and what’s more, they’re completely vertical, rather than angling outwards. This meant that they didn’t sit in the palms of my hands as well as more traditional gamepads, leading to a less secure feeling of grip.
This verticality extends to the orientation of the Joy-Cons. They don’t angle outwards at the bottom, which is part of the reason why reaching the bumpers can be a struggle. Other grips, such as the Genki Dual Wield, create such an angle, which feels like a more natural way to use the Joy-Cons.
The Ergo Grip 2 features a USB-C port for charging while you play. There are LEDs on top to indicate charging status, although these are basic, merely lighting up red while charging and green once complete.
At 200cm, the included USB-C cable is quite long, but it’s made from rubber. This contrasts with the best Nintendo Switch 2 accessories, including other controllers and grips, that come with braided cables for better flexibility. Thankfully, the cable is quite light, so I didn’t feel much resistance while playing, and I wasn’t worried about the cable disconnecting. However, it’s quite hard to unbunch, meaning it fails to maximize its entire length.
At less than £20, though, such shortcomings are easier to swallow. If all you’re after is a cheap way to securely hold your Joy-Con 2 controllers and want to play and charge at the same time, you could do worse than the Ergo Grip 2.
Snakebyte Ergo Grip S2 review: Price and availability
The Ergo Grip 2 can be ordered from Snakebyte’s website for €19.99, which is about £17. However, we have seen it for less than this at other retailers. This is a fair price for a Joy-Con 2 grip, especially one that features charge-and-play.
However, there are Switch 2 accessories that are arguably better value for money, including others from Snakebyte. Its Starter Kit S2, for instance, includes Joy-Con 2 grips, a case, wired earbuds, joystick caps, and a screen protector — all for about the same price as the Ergo Grip 2.
Should I buy the Snakebyte Ergo Grip S2?
Buy it if…
Don’t buy it if…
Snakebyte Ergo Grip S2 review: Also consider
How I tested the Snakebyte Ergo Grip S2
I tested the Ergo Grip 2 for several days. I played various games with it attached to my Joy-Cons, including Super Mario Bros. Wonder and Super Mario 3D All-Stars. I attached and detached my Joy-Cons several times to test the fit and pivot mechanism of the grip.
I’ve been gaming for decades and have used many systems and controllers in that time. I’ve also reviewed other Switch 2 grips, as well as numerous controllers for the Switch, PC, Xbox, and mobile.
